Low PIM Load / Termination 50W for Test and Measurement

Trusted AWT’s Low PIM loads / terminations offer outstanding PIM ratings.

PLOAD50. Low PIM load / termination for T&M applications.

Data Sheet   Sales Offices eContact us

Features

  • PIM rating up to -165 dBc @ 2 x 43 dBm
  • Frequency range: 385 / 698 to 2800 MHz
  • Dual port: DIN 7/16 (f), DIN 7/16 (m)

Reliable Test and Measurement (T&M) equipment is paramount when installing modern telecommunications networks. Only highest quality loads support accurate measurements. 

PLOAD50 / PLOAD50L

AWT Global’s PLOAD50 and PLOAD50L low PIM loads / terminations have been designed with demanding test and measurement (T&M) applications in mind. These low pim loads are well trusted by customers and are used in the field and the laboratory. Our  50W loads offer PIM ratings better than -165dBc @ 2x43dBm (PLOAD50). They come also with two connectors, DIN 7/16 (m) and DIN 7/16 (f). This convenient feature does not require adapters when testing mating with components of different connector genders have to be conducted. The load has an ear for carabine or lanyard.

Order Information

PLOAD50 Low PIM Load / Termination: 50W / 10 W (25 mins / permanent), PIM: < -165 dBc @ 2x43dBm, 698-2800 MHz, DIN7/16 (f) – DIN 7/16 (m)
PLOAD50L Low PIM Load / Termination: 50W / 10 W (25 mins / permanent), PIM: < -160 dBc @ 2x43dBm, 380-2800 MHz, DIN7/16 (f) – DIN 7/16 (m)

Specifications

Power 80W (CW) for 3 minutes
50W (CW) for 30 minutes
10W (CW) permanently
PIM PLOAD50:    < -165 dBc @ 2 x 43 dBm
PLOAD50L:  < -160 dBc @ 2 x 43 dBm
Frequency PLOAD50:    698 to 2800 MHz
PLOAD50L:  385 to 2800 MHz
Connectors DIN 7/16 (f), DIN 7/16 (m)

All data is subject to change without further notice.


Related Products

PLOAD100. Low PIM load / termination for lab and field PLOAD100. Low PIM load / termination 100 W AWT Low PIM Accessory KitPACC2 low PIM accessory kits. Load cables, adapters (4), torque wrench, set of wrenches, hard case