Vector Network Analyzers – Multi Port

 T-Series high performance multi-port VNAs have a wide dynamic range, low noise level and low trace noise.Multi Port Vector Network Analyzer (VNA)

Data Sheet   VNA Measurements Sales Offices eContact us

Features

  • Multi port: 4-10 ports
  • Independent sources, measurement and reference receivers for each port
  • Wide dynamic range: 123 dB typ
  • Frequency range: 100 MHz to 4 GHz
  • Low trace noise: 0.002 dB rms
  • IF bandwidth: 10 Hz to 100 kHz
  • VISA remote control commands

When testing times are of the essence and accuracy is paramount, T-Series Multiport Vector Network Analyzers (VNAs) , designed by Transcom,  are the answer. T58XX VNAs can carry out parallel tests with DUTs of up to 10 ports or test multiple DUTs simultaneously.

Multi Port VNA with multi port DUT

Each port has an independent source, measurement receiver and reference receiver, making this
VNA fast, really fast. Individual DUTs can be assigned individual external monitors, for unambiguous
test results. T-Series Multi Port VNAs offer VISA remote commands and can be easily integrated in
CAM environments.

Multi port VNA with multi DUTs and individual Monitors

T- Series Multiport VNA Models

Model

Frequency Range

Type

 

Measurement
Ports

 

System

 

T5840A-P04 100 MHz to 4.0 GHz Bench-top 4 Stand alone
T5840A-P05 100 MHz to 4.0 GHz Bench-top 5 Stand alone
T5840A-P06 100 MHz to 4.0 GHz Bench-top 6 Stand alone
T5840A-P07 100 MHz to 4.0 GHz Bench-top 7 Stand alone
T5840A-P08 100 MHz to 4.0 GHz Bench-top 8 Stand alone
T5840A-P09 100 MHz to 4.0 GHz Bench-top 9 Stand alone
T5840A-P10 100 MHz to 4.0 GHz Bench-top 10 Stand alone

Measurement Range

Impedance 50 Ω, 75 Ω ( with 50 to 75 Ohm pad)
Test Port Connectors N-type (f)
Number of Test Ports 4 – 10 (see table)
Frequency Range 100 MHz to 4.0 GHz ( see table)
Full CW frequency Accuracy ±5×10-6
Frequency Resolution 1 Hz
Measurement Points 2 to 10001
Measurement Bandwidths 10 Hz to 100 kHz
Dynamic Range >123 dB (100 MHz to 4.0 GHz, IFBW=10Hz)
> 95 dB (100 MHz to 4.0 GHz,  IFBW=3 kHz)

Measurement Accuracy

Trace Noise Magnitude: power 0.002 dBm RMA (typ.)
Trace Noise Magnitude: Phase 0.02 ° RMS (typ.)
Temperature Dependence Magnitude: 0.006 dB / °C
Phase: 0.15 deg / °C
Power Accuracy +/- 1.0 dB

Test Port

Power Range -50 dBm to +10 dBm
Power Resolution 0.05 dB
Max power / voltage 26 dBm / +/- 35V

Effective System Data (1)

Effective directivity 45 dB
Effective source match 40 dB
(1) applies over the temperature range of 23°C +/- 5°C after 40 minutes of warming up. with less than 1°C deviation from the full 2 port calibration temperature, at output power of -5dBm and IF bandwidth 10 Hz

Measurement Speed

Measurement time per port 200 us
Port to receiver port switch time <10 ms

General Data

Display 11.6 inch LCD touch screen
USB connectors 8 (2 x USB 3.0, 6 x USB 2.0)
LAN connectors  10/100/1000 Base Ethernet, 8-pin configuration
Video connectors DVI / HDMI
Operating Temperature  +5° to +40°C ( 41 °F to 104 °F)
Storage Temperature -45° to +60°C ( – 49 °F to 140 °F)
Humidity (max.)  90 %  (25°C)
Atmospheric pressure  84 to 106.7 kPa
Power Supply 220 VAC  +/- 10%, 50 Hz
115  VAC  +/- 10%, 60 Hz
Power Consumption  260 W
Dimensions ( mm / in) 440 x 267 x 360 / 17.3 x 10.1 x 14.2
Weight (kg / lbs)  12.5 to 15.5 kg / 27.5  to 34.0 lbs
Calibration Interval  3 years

Specifications subject to change without further notification.


Related Products

2-port VNA Vectro Network Analyzer (VNA) USB 2 portUSB-VNA